top of page

Asenware AW-D120 is an intelligent addressable sounder base for addressable detector (Model A) and conventional detector(Model B), which can be configured with Asenware AW-FP100 Series Addressable Fire Alarm Control Panel. Each point (device) can be given specific ID, which allows the panel to continuously monitor specific addressable sounder base location (point) and give a visual and audible signal when panel enters fire alarm condition.
 

Addressable Strobe Sounder Base characteristics
  • Loop powered sounder
  • LED indicator
  • Two wire connection (easy to install)
  • Can be used as a detector base
  • Meet all requirement of EN 54-3:2014

    Addressable Strobe Sounder Base Technical Parameters
    ModelAW-D120 (A for addressable detector, B for conventional detector)
    Operating voltage20~28VDC @Loop
    Operating current[@Loop 24VDC]Standby statuss7 mA,
    Alarm statuss60mA with addressable detector;
    Alarm statuss70mA with conventional detector;
    WiringThe promise of two bus system (Loop in, Loop out)
    Alarm SPL≥65dB @3m
    EnvironmentalTemperature range: -10~50°C (14~122°F)
    Humidity: 5 to 95% RH, non-condensing
    Mating hostAW-FP100 series fire alarm control panel
    Size130mm*31.2mm
    WeightAbout 145g

Strobe Sounder Base

  • Asenware Addressable Strobe Sounder Base D120 is an intelligent addressable sounder base for addressable detector (Model A) and conventional detector (Model B), which can be configured with Asenware AW-FP100 Series Addressable Fire Alarm Control Panel.

  • AW-D120

bottom of page